JETI Receiver Battery Power Ion 5200 2S2P TRAYLESS
Please note these Power-ion Batteries do not need balance charging and do not have a balance connecter, therefore please make sure your charger can function without the balance function connected.
Power-Ion accumulators are battery packs suitable to power the receiver and servos in the model.
The main advantages of Power-Ion accumulators include high mechanical resistance due to their metal case. The accumulators are also characterised by a long cycle life. No balancer is needed for their operation and in case the current is higher than 150A, built in short circuit protection is activated. There is also built in overcharge protection which is activated if the charging voltage is higher than 5V per cell.
The Lithium Ion cells will work in very low or very high temperatures (-10 - +60°C). Each pack is provided with one two-wire cable with the JR connector for charging and with one two-wire cable with the MPX connector for connection to the model. Both cables are of the same length.
Technical data:
Nominal Capacity: 5200mAh
Nominal Voltage: 7,2V
Charging End Voltage: 8,4V
Length of the leads (1x MPX + 1x JR ): 135mm each
Weight: 230g (incl. Box) / 204g (without Box)
Dimensions: 104x47x50mm (incl. Box) / 70x39x40mm (without box)
Duration Current max.:40A
Peak Current max.: 80A
Charge max.: 8A (at MPX Connector)
